محول سماعات كي زد إيه إم 01 من يو إس بي سي إلى دبوس 3.5 ملم، ديكودر ومضخم صوت محمول عالي الدقة، شريحتان مستقلتان، يدعم سماعات عالية المقاومة حتى ٦٠٠ أوم، صوت هاي فاي للأندرويد، آيفون ١٥، آيباد، الأجهزة اللوحية وأجهزة اللابتوب

The KZ AM01 is a compact USB-C to 3.5mm portable DAC and headphone amplifier designed to provide wired audio output on compatible devices without a traditional headphone jack. Unlike basic passive adapters, it uses a dedicated digital-to-analog conversion chip together with a separate MAX97220 amplifier chip for audio decoding and headphone amplification.

The AM01 supports PCM audio decoding at up to 32-bit/384kHz when the connected device, playback application, audio file, and operating-system settings support the selected resolution. Its amplifier provides an output of 1Vrms, rated at 30mW into a 32-ohm load, and dynamically supports headphone loads of up to 600 ohms.

A signal-to-noise ratio of 110dB and dynamic range of 110dB help provide clean and detailed audio for music, gaming, movies, and everyday listening. Its wired design supports synchronized audio without the pairing and battery requirements of Bluetooth accessories.

The short 110mm cable uses a Kevlar-braided construction for improved flexibility and durability, while its compact design makes it convenient for travel and everyday use with earphones, in-ear monitors, and compatible headphones.

Key Features:

• USB-C to 3.5mm portable DAC and headphone amplifier

• Separate digital-to-analog conversion and amplification chips

• MAX97220 independent headphone amplifier

• PCM decoding up to 32-bit/384kHz

• Analog-to-digital conversion up to 24-bit/96kHz for supported input functions

• 1Vrms output rated at 30mW into 32 ohms

• Supports compatible headphone loads from 16 ohms and up to 600 ohms

• 110dB signal-to-noise ratio

• 110dB dynamic range

• Frequency response of 20Hz–20kHz

• Low-power design with maximum stated consumption within 575mW

• Approximately 110mm cable length

• Kevlar-braided cable construction

• Compact plug-and-play design for compatible devices

Compatibility:

• Android smartphones and tablets with USB-C OTG and digital USB audio support

• iPhone 15 and later models with a USB-C port

• USB-C iPad models supporting USB audio accessories

• Windows laptops and tablets with a compatible USB-C port

• MacBooks and other compatible computers with USB-C audio support

• Wired 3.5mm earphones, in-ear monitors, and headphones rated at 16 ohms or higher

• Compatible 3.5mm headsets with microphone input, subject to device and operating-system support

Note: The connected USB-C port must support OTG and digital USB audio; a USB-C connector alone does not guarantee compatibility. The maximum 32-bit/384kHz decoding rate requires a compatible source file, device, operating system, and playback application. Support for loads up to 600 ohms does not guarantee the same volume or dynamics with every high-impedance headphone, as performance also depends on headphone sensitivity and power requirements. Microphone operation and in-line controls may vary by headset, device, and operating system. The package contains the KZ AM01 adapter only; phone, tablet, computer, headphones, earphones, and other accessories are sold separately.